Fibre Optic Cable Testing Machine


HT-8045A Programmable Temperature and Humidity Chamber
Send Enquiry

Product Details

Temperature range` HTL : -70 Deg. Cel.~ +150Deg. Cel., HTN : -50Deg. Cel.~ +150Deg. Cel., HTM : -40Deg. Cel.~ +150Deg. Cel., HT : -30Deg. Cel. ~ +150Deg. Cel., HTC : 0Deg. Cel. ~ +150Deg. Cel.
Volume of chamber 80 : 40x50x40cm, 150 : 50x60x50cm, 225 : 50x75x60cm, 408 : 60x85x80cm
Display LCD
Language Chinese/English setting
Capacity Maximum 100 programs
Steps 100 steps in total, 99 cycles repeat setting

Graph

Graph

Hung Ta has achieved a perfect design The rounded corners of the front face give a pleasing appearance the bump-free. Smoothly locking door has a flush surface that is free from any protrusions such as handles.

 

The model of programmable temperature/ humidity controller is under continuous improvement and so subject to change without notice.


Yes! I am interested


HT-9711 Dynamic Fatigue Testing Machine
Send Enquiry

Product Details

Power source Electro-Hydraulic Servo Control System
Force capacity 500 Kg, 5 KN
Max Stroke (nm) Static- ±50, Dynamic - ±25
Control mode Force, displacement control
Static force sensor capacity x 120%, x100%, x50%, x20%, x10%, (Auto Gain selection)
Static force sensing error <= ± 1 % Calibration error
Dynamic force sensor capacity 100%, x50%, x20%, x10%
Dynamic force sensing error <= ± 1 % Calibration error
Style T type
Operating width(mm) 400
Operating height(mm) 250-900
Dimension (cm) 120 (W) x 65 (D) x 220 (H)
Frequency Range LVDT built in actuator, 0.05~100Hz

Technical Data

Hydraulic Power Type QR-10 QR-20 QR-40 QR-60 QR-80
Minimum Flow Rate (I/min) 10 10 40 60 80
Servovalve Rated Flowrate (I/min) 15 15 45 80 120
Displacement Sensor 1 L / 1L 1 L / 1L

Well documented, secure, and practical, our payment procedures are client friendly. We offer our clients with different online and traditional options to make payments and ensure they are convenient. Keen on procurement of HT-9711 Dynamic Fatigue Testing Machine? We are one of the well known HT-9711 Dynamic Fatigue Testing Machine Suppliers


Yes! I am interested


HT-9760 Damper Testing Machine
Send Enquiry

Product Details

Vibrating load 1,2,5 tons or upon request
Vibration acceleration(v) 0.05 ~ 1.0 m/sec depending on axle rotating speed)
Vibrating rotation (n) 1.5 ~ 400 rpm
Vibration stroke (d) 0 ~ 80 mm
Testing space 700 mm
Up-down speed adjustment 300 mm/min
Power 3Ø, 220 / 380 / 415 V, 50/60 Hz
Weight Around 1500 kgs
Dimension of main frame 130 (W) x 110 (D) x 243 (H) cm

This tester is for testing the damping strength of shock absorbers. Available to test the shock absorbers for car and motorcycle and even truck, but only for rear shock absorbers for bicycle. Normally the specifications are different depending on different test requirements. Hereunder are the standard specifications for this model.


Yes! I am interested


HT-8623 Electronic Constant Speed Friction Testing Machine
Send Enquiry

Product Details

Test material Rubber mold, resin mold, specially processed woven item, plastics, sintered metal, etc.
Friction disk (FC-25) Material: Pearlitic cast iron (FC-25), 450-500 rpm Revolutions: 450-500 rpm
Test specimen Dimensions 25 x 25 x 5 mm
Test specimen Pieces 2 pcs
Test specimen Avg. Clamping Distance from the shaft center 150 mm
Min. Facial Pressure 3 kg/ sq. cm (37.5 kg)
Max. Facial Pressure 10 kg/ sq. cm (125 kg) (in specific cases 20 kg/sq. cm)
Counter Digital display
Heating device Below the bottom side of the friction disk is equipped with a circular pipeheater for necessary heat
Capacity 1.1 kw, 1 kw, 0.9 kw & 0.8 kw , total 3.8 kw
Voltage 110 V or 220 V
Power 7.5 kw hex-pole motor (with base)
Weight Appr. 350 kg
Dimension 150x150x180 cm

Designed for testing the frictional performance of automotive brake linings and clutch facings as stipulated in JIS-D4411, CNS-2586 D2002 thus contributing to the improvement of quality. This tester was created under the guidance of the Machinery Research Division, the Agency of Industrial Science and Technology. Since introduced to the market, this tester has been received quite well and emplo...

Read More...


Yes! I am interested


HT-9756 Computer Servo Control Hardness Testing Machine
Send Enquiry

Product Details

Capacity 200 kgs
Motor Servo motor control system
Speed 0.6~600 mm/min (computer control)
Test space Width : 750 mm, Height : 540 mm
Size of compression plate Ø200, Ø150, Thickness 50 mm (Aluminum))
Size of working table 70x70 cm, Thickness - 15 mm (Aluminum)
Test vent of compression 6 mm, Hole-center distance: 20 mm, Vent table size : 400x400 mm
Vertical dist. Between Base and working table 560 mm
Testing stroke 390 mm
Power source 1P 220 V 50 Hz /60 Hz

Inside the chairs of cars or motorcycles, the major filling is compounded foam. The quality of the foam matters the comfortability. This tester adopts the type of computer control to measure it original thickness of the foam. Compress 75% for its original thickness, release and then re-compress 25% for its original thickness and sustain for 20 seconds. After that, record its force and which is ...

Read More...


Yes! I am interested


Enquiry Now