Double Support Drop Test Machine Supplier



Contact Us

Phone : +60-67636031

Email Address : hungtatest@yahoo.com




Double support drop test machine

  • The bearing plate is magnetically controlled, and the test subject is free to fall in an instant. Maximum load: 65Kg, test height 40-200cm, testsubject size 80x80x80cm, power requirements 220V 60Hz single phase.
  • Lifting method: using motor drive, height can be adjusted.
  • Test angle: angle, line and face of packaging container.
  • Micro switch: upper and lower limits are micro-switch to prevent accidental operation of the impact, to protect the machine..
  • Tape measure: with 200cm long roll tape,and the indicator can quickly see the actual scale movements.
  • Fall plates: the use of aluminum alloy material which does not rust, and falling noise is small.
  • Control button: The use of the button magnetic switch, only a light press on the DROP button, the plates can automatically fall, and can be adjusted up and down.
  • Lead screw pole: the level of fall with round lead screw pole, can lift up and down vertically and smoothly.
  • Control box: The machine and the control box are separated and can be controlled in a safer way to prevent the operator from injury due to falling.
  • Grinding rod: one spindle, one auxiliary shaft on the left and right, all use the grinding spindle to prevent swinging from side to side.